Lang-T-Träger-frei

Case studies

Find what’s right for you

Everyone has different requirements. Which is why we offer an extensive portfolio of dynamic storage systems which are tailor-made to customer specifications. To provide you with an insight into our capabilities as storage specialists, the selected case studies below describe applications which use our lifts, handling systems, storage carousels, paternosters and other storage systems.

Storage Type

Pallets
Long Goods
Sheet Metal
Tools
Cylinders
Cable Reels
Rolls
Tires
Miscellaneous

Capacity

small
midsize
large

Category

Vertical Lift
Vertical Carousel
Handling System

Storage system for tools

TowerMat TM-FE2.1

3 storage systems were supplied for a German fittings manufacturer. Each of these three TowerMats has 61 carrier sets with a carrying capacity of 5,000 kg each.
Storage Type Tools
Capacity 61 Carrier Type
Total Payload 305.000 kg

Storage system for EUR-pallets

TowerMat TM-FE2.1

A TowerMat TM-FE2.1 cassette storage system for the storage of aluminum fittings and small parts in pallet cages and cardboard boxes was installed at the company Blecha in Neunkirchen, Austria.

The storage tower has a total height of 24 m (incl. Enclosure) and a total capacity of up to 70 system cassettes with a total of 420 spaces in EP Format (1200 x 800 mm).

Loading and unloading is by forklift truck, or manual.

Storage Type Pallets
Capacity 52 Carrier Type
Total Payload 156.000 kg

Storage system for tools

TowerMat TM-FE2.1

A total of 6 TowerMat TM-FE 2.1 cassette storage systems store plastic injection molding tools, with a total weight of up to 1,050,000 kg.

The storage systems have an overall height of 12m, or 9m working height.

The 35 cassettes per system can store tools, with different usable heights of up to 950 mm.

Storage Type Tools
Capacity 35 Carrier Type
Total Payload 175.000 kg

Automated store for pallets

INTERTEX Pallet store - TowerMat TM-FE2.3

This project was carried out through our partner Kardex in Norway. The storage system was clad and connected to the adjacent building. The double tower is about 19 meters high and loaded and unloaded at 3 different stations. All 3 stations are on different levels, and one of them is outdoors. The carrier units are equipped with a carrying capacity of 5000 kg. Up to 5 EUR-pallets can be stored on each of them. Warehouse management takes place over the higher-level Power Pick Global by Kardex Remstar.

Storage Type Pallets
Capacity 32 Carrier Type
Total Payload 165.000 kg

Storage system for boxes

TowerMat TM-FE2.2

Storage Type Pallets
Capacity 84 Carrier Type
Total Payload 216.000 kg

Portal paternoster for the storage of long goods

InterMat IM-BV1.1

4 carousels as a bridge paternoster for the storage of long goods were installed for a coater of window and door profiles in Austria. Each carousel is 25 meters deep and connected to the INT-WM warehouse management software supplied as standard. We had already supplied the same customer with a similar carousel, and a sheet metal store, the year before.

Storage Type Long Goods
Capacity 40 Carrier Type
Total Payload 36.000 kg

Carousel for long goods

InterMat IM-VO3.2

A long goods carousel with a working width of over 13 meters and 34 carrier sets was supplied to a manufacturer of expansion joints, metal bellows and metal bellows combinations. This is the fourth INTERTEX storage system that has been installed in this customer’s production hall.

Storage Type Long Goods
Capacity 34 Carrier Type
Total Payload 17.000 kg

Carousel for long goods

InterMat IM-VO3.1

A long goods carousel in an excavation, with 39 carrier sets, was supplied to a manufacturer of expansion joints, metal bellows and metal bellows combinations. There are now 4 INTERTEX storage systems in this customer’s production hall.

Storage Type Long Goods
Capacity 39 Carrier Type
Total Payload 19.500 kg

Carousel for long goods

InterMat IM-VNB1.2

INTERTEX carousel for the storage of profiles for the door and window industry. A carousel for the frequently required profiles was installed for an Austrian coating company near Salzburg. In order to save valuable floorspace, it was decided that a carousel with a bridge section should be installed.

 

Storage Type Long Goods
Capacity 31 Carrier Type
Total Payload 27.900 kg

Carousel for long goods

InterMat IM-VOB4.3

An InterMat carousel with a total of 3 serving positions was installed for a manufacturer of plastic windows and roller blinds. Profiles are stored in the customer’s exchangeable cassettes. The special feature of the system is that cassettes can be deposited at one serving position for a longer dwell time. This allows work to continue at the other two serving positions.

Storage Type Long Goods
Capacity 41 Carrier Type
Total Payload 41.000 kg

Carousel for aluminum profiles

InterMat IM-VN3.1

A carousel for the storage of aluminum profiles was integrated directly into production for a clean booth manufacturer.

Storage Type Long Goods
Capacity 52 Carrier Type
Total Payload 31.200 kg

Carousel for plastic pipes

InterMat IM-VN1.1

A gas supply company is using a carousel for the storage of plastic pipes up to a length of 12,000 mm. Retrieval takes place on the ground floor; the system has a horizontal chain reeving on the basement floor.

Storage Type Long Goods
Capacity 20 Carrier Type
Total Payload 40.000 kg

Carousel for aluminum profiles

InterMat IM-VN1.2

A carousel for the storage of aluminum profiles was integrated directly into production for a fire-fighting vehicles manufacturer. Loading is by means of a crane, profiles are taken out on the opposite side directly onto the roller conveyor of the sawing machine.

Storage Type Long Goods
Capacity 17 Carrier Type
Total Payload 11.050 kg

Carousel for lathe tools

InterMat IM-VH1.3

Carousel for the storage of high-quality lathe tools for medical technology. Retrieval is at the front. Both ground floor serving positions are secured against unauthorized access by roller doors.

Storage Type Long Goods
Capacity 75 Carrier Type
Total Payload 150.000 kg

Carousel for aluminum profiles

InterMat IM-VO2.1

A French door and window manufacturer is storing its plastic and aluminum profiles in an Intertex long goods store. The lateral retrieval of the profiles feeds directly into the storage magazine of the sawing machine.

Storage Type Long Goods
Capacity 10 Carrier Type
Total Payload 10.000 kg

Tempered carousel for bonded shapes

INTERTEX Tool store - EuroMat EM-75-300-406-14-500

INTERTEX created a carousel as a hot tower for bonded shapes for an aircraft cabin manufacturer. This hot tower serves as temporary storage and carries out tempering, during which a temperature of up to 100°C can be reached. In this way and thanks to 14 perforated carrier units with a carrying capacity of 150 kg each, a total of 28 bonded shapes are heated, dried and temporarily stored. Together with a SIEMENS-SPS controller, this tower carries out storage to the most modern level with high requirements. INTERTEX - We store it!

Storage Type Tools
Capacity 14 Carrier Type
Total Payload 2.100 kg

Carousel for measuring equipment

EuroMat EM-160-1000-685-457-28-1000

Different gages are stored in this carousel. The special feature of the carrier units is their 2 different loading heights (chain pitch). 14 carrier units can be loaded higher and with more weight than the remaining 14. The large carrier units are equipped with a swiveling front lip and are taken out on small rollers due to the weight. The carrier sets for the small gages are pulled out on a plastic system.

Storage Type Tools
Capacity 28 Carrier Type
Total Payload 12.600 kg

Carousel for tools

EuroMat EM-120-500-381-21-650

12 carousels for tools storage were installed in production at Europe’s largest couplings manufacturer.

Storage Type Tools
Capacity 21 Carrier Type
Total Payload 12.800 kg

Carousel for tools

InterMat IM-VO1.1

INTERTEX carousels were put into service at Europe’s largest couplings manufacturer at its premises in Germany, Hungary, England and Brazil. All carousels are guided free from vibrations to prevent the trays from being tilted.

 

Storage Type Tools
Capacity 13 Carrier Type
Total Payload 13.000 kg

Carousel for cable reel

InterMat IM-VO2.2

A packaging machine manufacturer from Dresden builds on Intertex’s quality.

An Intertex InterMat carousel was installed for the storage and packaging of cable harnesses.

Each reel can be operated separately and cut to length with the adjacent cable cutting machine.

This makes effective and time-saving work possible.

Storage Type Cable Reels
Payload 1.250 kg
Total Payload 26.500 kg

Carousel for bobbin storage

InterMat IM-VO2.1

Another successful project between Kardex (Switzerland) and Intertex: we supplied 2 identical carousels for the storage of cable reels to an enterprise in French-speaking Switzerland. Each carousel has 28 carrier sets, and each carrier set provides storage space for 25 “bobbins”. This gives a total storage capacity of 1400 “bobbins” for the two units.                              The 2 storage systems are situated outdoors right in front of the hall. Two transparent roller doors in front of the loading stations, controlled by our pre-selector control, serve firstly as trap guards when the machine is running, while also offering protection from the wind and cold.

 

Storage Type Cable Reels
Capacity 28 Carrier Type
Total Payload 45.500 kg

Carousel for cable reel

InterMat IM-BO1.2

Bridge carousel with total depth of 25 meters approx. and a total capacity of 255 reels with a diameter of 800 mm.

Storage Type Cable Reels
Capacity 51 Carrier Type
Total Payload 38.250 kg

Carousel for cable reel

InterMat IM-VO2.1

"InterMat" carousel as a compact system with 2 slings for the storage of cable reels. The cable cutting machine by the Swiss company RAMATECH Systems AG is located directly in front of the carousel and can be moved aside.  Carousel selection is done through the cable cutting machine controller.

Storage Type Cable Reels
Capacity 17 Carrier Type
Total Payload 42.500 kg

Carousel for cable reel

InterMat IM-VO1.2

A total of 6 carousels were erected next to each other for the storage of cable reels. Loading is at the back. Fully automatic retrieval with forklift.

Storage Type Cable Reels
Capacity 12 Carrier Type
Total Payload 6.480 kg

Carousel for cable reel

InterMat IM-HO2.1

Carousel with horizontal chain reeving, required due to the low room height of 2800 mm. Cable reels with a diameter of up to a max. of 1000 mm and a weight of 800 kg to 1600 kg can be stored in it.

 

Storage Type Cable Reels
Capacity 16 Carrier Type
Total Payload 23.400 kg

Carousel for cable reel

InterMat IM-VO1.1

Carousel for the storage of cable reel up to a max. diameter of 1000 mm.

Storage Type Cable Reels
Capacity 13 Carrier Type
Total Payload 22.400 kg

Storage system for pallets

TowerMat TM-RE10.1

Two TowerMat TM-RE10.1 dynamic stores were installed at an energy supply company in Russia.                                        Each storage system stores 80 system pallets with dimensions of 1,600 x 1,500 mm and a carrying capacity of 4,000 kg each.

Storage Type Pallets
Capacity 80 Carrier Type
Payload 4.000 kg
Total Payload 320.000 kg

Storage system for pallets

TowerMat TM-FE2.2

An Intertex TowerMat TM-FE2.2 storage system for storing long goods and EUR-pallets was installed for the company Tractive AB in Borlänge, Sweden.

The system is loaded outdoors by forklift truck, or with the gantry crane installed on the building.

 Retrieval is indoors by crane.

 

Storage Type Pallets
Capacity 34 Carrier Type
Payload 3.000 kg
Total Payload 102.000 kg

Carousel for tilting sunroofs

EuroMat EM-120-650-508-12-1300

In an automotive plant, joined tilting sunroofs are temporarily stored in this carousel during their hardening process. The mounting fixtures are automatically positioned and loaded every 120 sec. The 12 carrier units have dimensions of 2000 x 1300 mm.

Storage Type Pallets
Capacity 12 Carrier Type
Total Payload 1.800 kg

Vertical pallet lift

TowerMat TM-FE2.1

Grundfos in Bjerringbro, Denmark puts its trust in INTERTEX.

Storage Type Pallets
Capacity 24 Carrier Type
Total Payload 48.000 kg

Carousel for wheel sets

INTERTEX Tire store - InterMat IM-HO6.1

Through our partner Kardex we supplied a Belgian car dealer with 2 identical carousels for the storage of passenger car tires and passenger car wheel sets. The paternoster is horizontally managed and has a depth of almost 20 meters. The system provides over 1300 linear meters’ storage space in total.

Storage Type Tires
Capacity 110 Carrier Type
Total Payload 66.000 kg

Carousel for passenger car wheel sets

InterMat IM-VHO4.1

An INTERTEX carousel with several slings for the storage of passenger car wheel sets was installed for a leading car manufacturer. The storage system makes use of the full height and depth of the room and is positioned directly over its own undergrate air duct.

Storage Type Tires
Capacity 39 Carrier Type
Total Payload 273.000 kg

Carousel for tires

InterMat IM-VO1.1

Three InterMat carousels were installed at a Canadian airline for storing tires with a diameter of between 580 mm and 810 mm. Each carrier unit has a carrying capacity of between 300 kg and 600 kg.

Storage Type Tires
Capacity 14 Carrier Type
Total Payload 4.200 kg

Carousel for tires

InterMat IM-VO1.1

INTERTEX carousel for storing passenger car tires.

Storage Type Tires
Capacity 10 Carrier Type
Total Payload 6.400 kg

Carousel for tires

InterMat IM-VO2.2

Tires at one of the largest tire producers in the world are stored in two INTERTEX dynamic carousels. Quick access to the wares is possible thanks to the proven paternoster principle. Tires with a maximum diameter of up to 800 mm can be stored in this InterMat carousel.

.

Storage Type Tires
Capacity 20 Carrier Type
Total Payload 13.000 kg

Storage system for rolls

TowerMat TM-UE14.1

A large number of rolls were required for the maintenance of the production system for the manufacture of flat-rolled aluminum products at a company in the USA. These rolls are stored in a roll-over store with 14 towers and 145 carrier units, for a total of 245 rolls. Depending on the diameter of the rolls, one, two or three rolls per system cassette can be stored. Special holders guarantee professional storage on set support surfaces.

Storage Type Rolls
Capacity 145 Carrier Type
Total Payload 566.000 kg

Carousel for rolls

INTERTEX Roll store - InterMat IM-VO2.1

The two Intertex carousels store rolls and feed them directly onto the cutting machine for order picking.

 

Storage Type Rolls
Capacity 10 Carrier Type
Total Payload 20.000 kg

Storage system for rolls

TowerMat TM-FE2.1

Approx. 800 proto-rolls are stored in this lift store. The floorspace requirements of the previous conventional static racking was four times as high. The dynamic storage system brings enormous savings in access times.

 

Storage Type Rolls
Capacity 45 Carrier Type
Total Payload 22.500 kg

Carousel for sheet metal coils

INTERTEX Roll store - InterMat IM-VN1.2

INTERTEX carousel for storing sheet metal coils. The coils are taken straight out of the carousel into the shear.

Storage Type Rolls
Capacity 22 Carrier Type
Total Payload 22.000 kg

Carousel for rolls

INTERTEX Roll store - InterMat IM-VO1.1

Germany’s largest skis and snowboard manufacturer stores the ski and snowboard surfaces in two carousels. These are fed directly into the cutting system, also supplied by INTERTEX, straight off the carousel.

Storage Type Rolls
Capacity 21 Carrier Type
Total Payload 8.400 kg

Carousel for rolls of film

INTERTEX Roll store - InterMat IM-VO6.1

The Intertex extensible modular carousel was extended to a total of 6 slings in two stages. The rolls of films are taken straight from the pressure machine into the carousel for interim storage.

                                                                                                                                                                     

 

Storage Type Rolls
Total Payload 60.600 kg

Carousel for cylinders

INTERTEX Cylinder store - InterMat IM-VO4.1

This customer stores approx. 2500 pressure cylinders in a total of 37 INTERTEX vertical carousels.

Storage Type Cylinders
Capacity 78 Carrier Type
Total Payload 50.700 kg

Carousel for pressure cylinders

INTERTEX Cylinder store - InterMat IM-VN2.1

Storage Type Cylinders
Capacity 39 Carrier Type
Total Payload 27.300 kg

Industrial paternoster for Cylinders

INTERTEX Cylinder store - InterMat IM-VO12.1

In cooperation with our representative in the USA, a vertical carousel with 12 slings and total of 143 carrier units for cylinder storage was delivered to a reputable leading chemical company. The retrieval point on this dynamic storage system is positioned one floor above the vertical carousel for logistical reasons.

 

Storage Type Cylinders
Capacity 143 Carrier Type
Total Payload 37.650 kg

Carousel for pressure cylinders

INTERTEX Cylinder store - InterMat IM-VBO4.1

InterMat carousel with a total of 60 carriers for the storage of pressure cylinders. The total carrying capacity is 57600 kg.

Storage Type Cylinders
Capacity 60 Carrier Type
Total Payload 57.600 kg

Storage system for long goods

TowerMat TM-EE1.1

Storage Type Long Goods
Capacity 16 Carrier Type
Total Payload 24.600 kg

Storage system for long goods

TowerMat TM-EE1.1

A joint project with our partner KARDEX installed a TowerMat for the storage of 40 t long goods to a manufacturer of electronic components.

Storage Type Long Goods
Capacity 19 Carrier Type
Total Payload 31.200 kg

Storage system for long goods

TowerMat TM-UE16.3

A TowerMat storage lift with 16 towers and over 350 cassettes in total, for the storage of tubes and bar materials, was constructed for a leading steel handler in Switzerland, BRÜTSCH & RÜEGGER METALS AG. 2 saws, including a BEHRINGER band saw, are connected to the dynamic storage system which provides a load capacity of 3000 kg per cassette. The whole long goods store was set in a 3 meter deep excavation to maximize its storage capacity. Loading and unloading takes place at a total of 3 loading and unloading stations. A lateral station is situated at the front, and two lengthwise stations at the level of the two saws. Operation is by the INTERTEX INT-DSC1 pre-selector control.

Storage Type Long Goods
Capacity 356 Carrier Type
Total Payload 1.068.000 kg

Storage system for long goods

TowerMat TM-UE38.3

A Swiss company near the German border solved its storage problem with a INTERTEX TowerMat

Storage Type Long Goods
Capacity 390 Carrier Type
Total Payload 468.000 kg

Storage system for long goods

TowerMat TM-FE2.1

A project in conjunction with our partner Kardex in Australia. The project consists of two INTERTEX TowerMat storage systems and 12 Kardex Shuttles XP. Control of all the systems is with the Kardex warehouse management software.

Storage Type Long Goods
Capacity 47 Carrier Type
Total Payload 11.750 kg

Storage system for long goods

TowerMat TM-UE18.3

This roll-over store was optimally integrated into the hall available. Furthermore, the bridge section permits the utilization of the existing tower. A further special feature - along with the load capacity of almost 500 tonnes - is the shared lifting station integrated into the serving cart. This allows shorter pieces to be lifted without taking the rest of the cassette up with it.

Storage Type Long Goods
Capacity 158 Carrier Type
Total Payload 474.000 kg

Storage system for long goods

TowerMat TM-FE2.2

A TowerMat long goods storage system was installed for the company DeWilde in cooperation with our partner Kardex in the Netherlands. Sectional steel and steel bars, as well as round tubes, are loaded with an indoor crane.

Storage Type Long Goods
Capacity 60 Carrier Type
Total Payload 123.000 kg

Storage system for long goods

TowerMat TM-FE2.2

This TowerMat type long goods storage system was processed through our dutch cooperation partner, Kardex.

Storage Type Long Goods
Capacity 38 Carrier Type
Total Payload 57.000 kg

Storage system for plastic profiles in XXL construction

TM-UE58.4

An INTERTEX TowerMat cassette storage system for profiles was delivered to the company Stegherr Kunststofftechnik GmbH in Bavaria in 2013.

Storage Type Long Goods
Capacity 752 Carrier Type
Total Payload 1.128.000 kg

Carousel for ceramic workpiece carrier

INTERTEX Tool store- EuroMat EM-75-300-355-8-340-SON

A storage tower, serving as a cooling tower, was designed for a ceramics manufacturer. A robot system takes the workpiece carriers straight off the production line and loads the carousel with millimetric precision in a fully automated manner. The workpiece carriers and taken out on the opposite side.

Storage Type Tools
Capacity 24 Carrier Type
Total Payload 1.200 kg

Storage system for long goods and pallet cages

TowerMat TM-FE4.2

A Tübingen-based drilling, turning and milling tool manufacturer chose a TM-FE4.2 type TowerMat for storing its long steel profiles.

Storage Type Long Goods
Capacity 100 Carrier Type
Total Payload 420.000 kg

Storage system for long goods

TowerMat TM-FE5.3

In cooperation with our partner Kardex-Remstar, a TowerMat TM-FE5.3 cassette storage system was installed for a prominent European ball and roller bearings manufacturer, for the storage of lathe tools of up to 6000 mm.

 

The loading and unloading takes place at a total of 3 stations. Two of these stations are positioned directly on the roller conveyor to the saws, to guarantee a safe, swift transport of the long goods to the saws.

Storage Type Long Goods
Capacity 89 Carrier Type
Total Payload 133.500 kg

Storage system for long goods

TowerMat TM-EE1.2

Single-tower long goods store: This single tower serves as a long goods store and provides space for 20 long goods cassettes. A special feature is the second output point. A cart transports the cassettes requested to the loading/unloading position. A further TowerMat TM-UE 8.3 type storage system was delivered to this customer at the same time.

Storage Type Long Goods
Capacity 20 Carrier Type
Total Payload 30.000 kg

Storage system for long goods

TowerMat TM-UE8.3

Long goods with a total weight of over 396 000 kg are stored in this dynamic roll-over store. The store holds a total of 132 carrier units distributed between 8 towers, with a load capacity of 3000 kg each. The use of three serving stations with integrated lifting station, among other accessories, for loading and unloading with a forklift truck, increases the productivity and flexibility of the store enormously.

A further TM-EE1.2 type TowerMat storage system was delivered to this customer at the same time.

Storage Type Long Goods
Capacity 132 Carrier Type
Total Payload 396.000 kg

Storage system for long goods

TowerMat TM-EE1.1

We delivered a TowerMat TM-EE 1.1 type dynamic storage system for the storage of long goods to a leading manufacturer of industrial centrifuges from the Greater Munich area. The various usable cassette heights were precisely tailored to the customer’s requirements.

Storage Type Long Goods
Capacity 15 Carrier Type
Total Payload 31.000 kg

Storage system for long goods

TowerMat TM-FE2.1

Another successful project which we have been able to carry out with our partner Kardex in the Czech Republic. A TowerMat dynamic long goods storage system for the storage of tube bundles was installed for the company Baumruk.

Storage Type Long Goods
Capacity 29 Carrier Type
Total Payload 90.900 kg

Storage system for long goods

TowerMat TM-FE2.1

A Swabian manufacturer of tool holders is storing lathe tools in an INTERTEX TowerMat storage system. Loading and unloading of the system cassettes is done by means of a gantry crane built directly onto the storage tower. The storage goods can be brought straight onto the shared roller conveyor with a mobile lateral cart for further processing.

Storage Type Long Goods
Capacity 49 Carrier Type
Total Payload 73.500 kg

Storage system for long goods

TowerMat TM-EE1.1

Another satisfied customer, a steelwork fabricator in Stuttgart.

 

 Installation of a TowerMat TM-EE1.1 cassette storage system for the storage of sectional steel and steel bars.

Storage Type Long Goods
Capacity 24 Carrier Type
Total Payload 60.000 kg

Storage system for long goods

TowerMat TM-FE4.2

A manufacturer of industrial roller conveyors in Arkansas, USA now stores their raw material in an INTERTEX TowerMat storage system.

Storage Type Long Goods
Capacity 51 Carrier Type
Total Payload 71.400 kg

Storage system for long goods

TowerMat TM-FE4.1

In conjunction with our partner Kardex Remstar, we installed a TowerMat TM-FE4.1 for the storage of long goods, for a prominent enterprise in the oil and gas industry in Housten, Texas.

Storage Type Long Goods
Capacity 49 Carrier Type
Payload 2.600 kg
Total Payload 127.400 kg

Storage system for long goods

TowerMat TM-FE2.1

Our customer in the black forest is a manufacturer of screw fittings, ball valves, valves, fittings, pipes and tubes out of stainless steel.

Storage Type Long Goods
Capacity 29 Carrier Type
Total Payload 51.500 kg

Storage system for long goods

TowerMat TM-FE2.4

A TowerMat TM-FE2.4 cassette storage system was installed for a Swabian machine and plant manufacturer, for the storage of aluminum profiles.

Storage Type Long Goods
Capacity 43 Carrier Type
Total Payload 64.500 kg

Storage system for sheet metal

TowerMat TM-RT4.2

INTERTEX sheet metal store by TRUMPF laser. The company GEDA places its trust in INTERTEX once again. A long goods store had already been delivered to them in 2008. This time, a dynamic sheet metal store was integrated directly into production. A laser system by the company TRUMPF is connected right next to the store.

Storage Type Sheet Metal
Capacity 91 Carrier Type
Total Payload 273.000 kg

Storage system for sheet metal set in excavation

TowerMat TM-FE2.2

In order to increase its storage capacity, this sheet metal store was set in a specially-prepared 2.5 m deep excavation.

Storage Type Sheet Metal
Capacity 56 Carrier Type
Total Payload 140.000 kg

Storage system for sheet metal

TowerMat TM-EE1.1

A single tower for the storage of different steel plates was installed for a manufacturer of cranes, chassis and motors from the Ruhr region.

Storage Type Sheet Metal
Capacity 13 Carrier Type
Payload 39.000 kg
Total Payload 39.000 kg

Storage system for sheet metal

TowerMat TM-EE1.1

This TM-EE1.1 sheet metal store by INTERTEX accommodates 11 storage pallets. It contains the sheet metal stock for placement onto the adjacent TRUMPF laser.

Storage Type Sheet Metal
Capacity 11 Carrier Type
Total Payload 36.000 kg

Storage system for sheet metal

TowerMat TM-FE2.2

Another project which goes through a roof! We supplied the company Bachofer GmbH & Co. KG from Weilheim an der Teck with a dynamic sheet metal store. The double tower is around 15 meters high and provides 120 storage places.

Storage Type Sheet Metal
Capacity 120 Carrier Type
Total Payload 360.000 kg

Storage system for sheet metal

Towermat TM-FE2.1

In cooperation with our partner Kardex Turkey, we delivered a dynamic cassette storage system for the storage of sheet metal to a business from the Turkish capital, Ankara.

Storage Type Sheet Metal
Capacity 102 Carrier Type
Total Payload 153.000 kg

Automated laser production

PickMat-3015

We delivered a PickMat first of all, with a double material cart as a stand-alone solution. A year later, a move into a new hall gave space for a TowerMat, and with it, fully automated laser production.

Storage Type Sheet Metal
Capacity 62 Carrier Type

Storage system for sheet metal

TowerMat TM-FE2.1

A TowerMat TM-FE 2.1 sheet metal store was installed for our customer, and Austrian company who are global market leaders in track-laying machines.

Storage Type Sheet Metal
Capacity 53 Carrier Type
Total Payload 140.000 kg

Pallet store with sound insulated and sectional door

TowerMat TM-FE2.2

In the course of a new construction, we supplied four TowerMat type storage system to the company Albert Handtmann Elteka from Biberach. One of these is this flat storage system, built as a double tower with two serving stations. One of the loading carts travels through a sound insulated and sectional door in the adjoining hall.

Storage Type Sheet Metal
Capacity 32 Carrier Type
Total Payload 88.000 kg

Storage system for sheet metal

TowerMat TM-FE1.2

Storage Type Sheet Metal
Capacity 22 Carrier Type
Total Payload 66.000 kg

Storage system for sheet metal

TowerMat TM-EE1.1

Storage Type Sheet Metal
Capacity 14 Carrier Type
Total Payload 28.000 kg

Storage system for sheet metal

TowerMat TM-RE 4.2

A dynamic TowerMat TM-RE 4.2 type sheet metal store with laterally operating storage and retrieval machine has been installed for our customer, a job order production company in Bavaria.

Storage Type Sheet Metal
Capacity 84 Carrier Type
Payload 3.000 kg
Total Payload 252.000 kg